Car Sticker Wrap - Small Compact Car Installation DSS01
Media Material: Outdoor Vehicle Vinyl Sticker
Film'sBrand: Avery MPI Value Flim
Quality: 1200 x 1200 dpi HD Quality Outdoor Printing.
Printer model: HP Latex
Finishing: Double Layer Outdoor.
Printed Ink: Original HP Latex Ink.
How to Take Care:
Care for your vehicle graphics like you would any fine paint finish. Using high quality 3M products designed specifically for car care and these cleaning and maintenance procedures will help keep your 3M vehicle graphics looking their best.
- Wash whenever the car appears dirty. Contaminants allowed to remain on the graphic may be more difficult to remove during cleaning.
- Rinse off as much dirt and grit as possible with a spray of water.
- See "Difficult Contaminants" on page 1, for spot cleaning bird droppings, tar, etc.
- Use a wet, non-abrasive detergent such as 3M™ Car Wash Soap 39000 or Meguiar’s NXT Generation® Car Wash or Deep Crystal® Car Wash and a soft, clean cloth or sponge.
- Rinse thoroughly with clean water. To reduce water spotting, immediately use a silicone squeegee to remove water and finish with a clean microfiber cloth.
- IMPORTANT NOTE 3M does not recommend using wax or other similar coatings on vehicle graphics.
Vehicle Type: less than BDM1500KG